This results in an interruption to your internet service. The following are the symptoms of this issue: Not having internet despite being connected to the Wifi is none less than a nightmare.
“Wi-Fi” doesn’t have a valid IP configuration
To do that, follow these steps: Start Command Prompt as administrator. When Command Prompt opens, enter the following lines: Solution 3 — Set the channel width to Auto One suggested solution is to set the channel width to Auto. When Network Connections window opens, right click your wireless connection and choose Properties from the menu. Click the Configure button and go to the Advanced tab.
Locate Click OK to save changes. One workaround that is suggested by users is to assign an IP address for your device manually. Right click your wireless network and choose Properties from the menu. To fix this issue you need to access your router and increase the number of DHCP users manually. Users reported that after increasing the number of DHCP users all issues were resolved. To see how to increase the number of DHCP users on your router, be sure to check its manual. In addition, some users also suggest that you can fix the problem with IP configuration by increasing the number of maximum wireless users.
Some routers are limited to only 10 wireless users, and by increasing the maximum number of users the issue was resolved. Solution 6 — Perform a Clean boot Some users claim that you can fix this problem by performing a Clean boot.
To perform Clean boot do the following: Press Enter or click OK. When Windows Configuration window opens, select Selective startup and uncheck Load startup items. Go to Services tab, check Hide all Microsoft services and click Disable all button.
Go to Startup tab, and click Open Task Manager. Right click each item on the list and choose Disable. Restart your computer. After restarting your computer check if the issue is resolved. Users reported that Avast and AVG antivirus can cause this issue, and after removing the problematic software the issue was resolved. Bear in mind that almost any antivirus software can can this problem, so be sure to temporarily remove all third-party antivirus tools.
If removing the antivirus software fixes the problem, you can proceed and install the latest version of your antivirus or switch to a different antivirus software. To make sure that DHCP is enabled, you can always troubleshoot your network connection by doing the following: Open Network Connections.
Locate your network adapter, right click it and choose Diagnose. Wait for the scan to finish. This process is similar to the one described in Solution 4, so make sure you check that solution. Lastly, you can always turn on DHCP from your router settings in case you turned it off earlier. Solution 9 — Uninstall your wireless adapter driver Users claim that they managed to fix this problem by uninstalling their wireless adapter driver. When Device Manager opens, locate your wireless device, right click it and choose Uninstall.
If available, check Delete driver software for this device and click OK. After the driver is removed, restart your PC. When your PC starts again, Windows 10 will automatically install the default wireless driver.
If the default driver works well, you can continue using it, but if there are any problems you might have to download the latest driver and install it. Solution 10 — Make sure that the security type matches Sometimes problems with IP configuration can be caused by your security type, so make sure that the security type on your PC matches the security type set by your router.
To do that, simply open your router settings page, visit the wireless section and check what type of security is being used. After that, make sure that your wireless adapter is using the same security type. Problems with Wi-Fi IP configuration can prevent you from accessing the Internet, but we hope that you managed to fix this problem after using one of our solutions.
The WiFi doesn’t have a valid IP configuration problem can occur at any time The problem mostly hit the Windows 10 users especially if they. Windows 10 doesn’t have a valid IP configuration? Step by Step Step #8. Now, look for WLAN AutoConfig in the Services window. Again. No matter whether you have Windows 8 or Window 10 installed. be able to easily fix the error “WiFi doesn’t have a valid IP configuration”.
[FIXED] Wifi Doesn’t Have a Valid IP Configuration on Windows 10
Many Windows users reported that they got the no valid IP configuration error message when they try to perform a diagnosis after the wireless failure. Hardware problems related to wireless network connection 2. Network problems from the network operators 3. Disabled Windows 10 network services 5. Virus or startups affecting wireless connection 6.
2. Release & Renew IP Address
You should check other computers or cell phones for internet connectivity. If your computer is the only device with problems and other devices are easily connecting with your Wi-Fi then apply solution below.
REVIEW: [Solved] How to Fix “WiFi Doesn’t Have a Valid IP Configuration”
Many times Windows users face this problem when they try to connect to a Wi-Fi network or Wireless network connection doesn’t have a valid IP configuration. Click the Windows key + R. Type in bzfomg.me to open Command Prompt. Paste the following lines and click enter key after each one. ‘netsh. I recently bought a windows 8 laptop which used to access the internet fine for a few weeks but after a couple of updates it has stopped.